Xenox C300 & C400

With shipment Default (Same as Billing) for $0.00
Description

Mobile c-arm

Xenox C300 is a highly reliable, tough and enduring digital mobile system with a flat panel equipped with image intensifier. Xenox C400 is a highly reliable, tough and enduring digital mobile system with a flat panel equipped with digital angiographic memory suitable for all the applications having high diagnostic content.

Xenox C400

  • Horizontal run: manual 210 mm; E-motion 175 mm
  • Motorized Vertical run: 500 mm; 500 mm
  • C-Arm LATERAL Rotation: ± 140° (± 180° *); + 180°; - 90° (-180° manual)
  • C-Arm ORBITAL Movement: 150° (105°, -45°); 150° (105°, -45°)
  • WIG-WAG: ± 10°; ± 10°
  • Useful space: 810 mm; 810 mm
  • C-Arm Depth: 640 mm; 640 mm
  • Min/ Max Height: 1455 / 1955 mm; 1455 / 1955 mm
  • Min/Max Length: 2085/ 2295 mm; 2110/ 2285 mm
  • Max Width: 800 mm; 800 mm
  • S.I.D.: 1065 mm; 1065 mm
  • *Measure obtained without security mechanical block

Xenox C300

  • Horizontal run: manual 9" 210 mm; E-Motion 9" 175 mm; E-Motion 12" 210 mm
  • Motorized Vertical run: 500 mm; 500 mm; 460 mm
  • C-Arm LATERAL Rotation: ± 140° (± 180° *); + 180° - 90° (-180° manuel); + 180° - 90° (-180° manual)
  • C-Arm ORBITAL Movement: 135° (90°+45°); 135° (90°+45°); 115° (90°+25°)
  • WIG-WAG: ± 10; ± 10°; ± 10°
  • Useful space: 755mm; 755mm; 708mm
  • C-Arm Depth: 665 mm; 665 mm; 640 mm
  • Min/ Max Height: 1750 / 2250 mm; 1750 / 2250 mm; 1805/ 2265mm
  • Min/Max Length: 2075/ 2285 mm; 2100/ 2275 mm; 2118/ 2293 mm
  • Max Width: 800 mm; 800 mm; 800 mm
  • I.D.: 1029 mm; 1029 mm; 1009mm
  • *Measure obtained without security mechanical block

OPERATING MODES AND FUNCTIONALITY

OPERATING MODALITIES OF (RTP) MEMORY

• CONTINUOUS FLUOROSCOPY

• HIGH DOSE PULSED FLUOROSCOPY

• PULSED FLUOROGRAPHY

• DIGITAL SNAPSHOT

• FLUOROSCOPY mA : (range: 0,5-8 mA)

• RADIOGRAPHY: 2 points technique (kV and mAs)

• CINE sequence: up to 25 fps. (included in basic configuration)

SOFTWARE BASE FUNTION (LIVE PROCESSING):

• Display of patient data, hospital name, x-ray parameters on operator monitor

• Recursive filter for noise reduction

• Dinamic Recursive Filter for patient’s movement compensation

• Edge enhancement spatial filter

• Edge enhancement spatial filter

• Horizontal and vertical image inversion

• Digital zoom during fluoroscopy mode (new)

• Metal detection in manual or automatic mode (new)

• Continuous digital image rotation

• Adjustable contrast and brightness

• Adaptive gamma curve

• Continuous fluoroscopy modality with LIH (Last Image Hold)

• Low dose fluoroscopy

• Timer Function

• MEASUREMENTS: length, angles, with manual calibration system, text overlay

• Anatomic program set up

• 80 anatomic programs in fluoroscope

POST-PROCESSING BASE FEATURES:

• Last Image Hold (LIH)

• Last fluoroscopy Run Hold (LRH)

• Horizontal/Vertical image inversion

• Digital image rotation

• Grey scale image inversion

• Adjustable contrast and brightness

• Adjustable Gamma curve (LUT)

• Edge enhancement

• Electronic shutters (Rectangular and circular)

• Electronic Zoom Roam from 1x to 5x

• Electronic mobile lens

• Mosaic Overview

• Patient’s selection for exams and images management

• Patient’s exams transfer in the DICOM system

There are yet no reviews for this product.

Address:05 rue jamel abdnacer Z.I BORJ CEDRIA 2055 BIR EL BEY BEN AROUS TUNISIA
Phone: +216 79 412 889